Power Cap
What kind of source of the CAP is the best, as you dial?
As a Canadian Tire and Best Buy or Futureshop 800Watt Amp to go around $ 130
You can do 1 farad or 1.5 Farad (for subsequent updates). Brand does not matter much. That is like asking what brand bulb to get. Http: / / spkrbox1.spaces.msn.com / sound for real, "" advice. The system mean nothing without a well designed box to put your subs in Some manufacturers have recommendations as to the dimensions of the different types of boxes. It is best to find someone who builds boxes if you go with something more than a closed box. You should always coincide RMS (Root Mean Square) watts and submarine channel amplifier and the impedance (resistance). When a submarine has a rating of 600 Watts MAX really does have a level of 200 Watts RMS RMS. RMS is the power rating of its most likely going to leave it. Remember, a 200-watt RMS amplifier output is more power than a 200 Watt Max. If your amplifier is rated at 4Ω waive 2Ω, fry. This is the formula for submarines in parallel: Z = 1 / (1/sub1 + 1/sub2 + + 1/sub3 ….) For series, just add them up (sub1 + sub2 + …). You can mix and match these equations to get the right impedance required amp. Example 1: AMP is 2 channel and rated at 4Ω, 4 subs @ 4Ω each. If I connect two parallel and two in parallel and connect the two pairs in series, I would have a total impedance (resistance) of 4Ω. So for the amplifier is only a sub. Example 2: Amp is rated 1Ω mono, 2 subs @ 4Ω each coil dual voice. If I connect two voice coils in parallel and two voice coils in series and connect the two subs in parallel would have a total impedance of 1.6Ω. What would be perfect for a 1Ω stable mono amp. You must use a capacitor as well. Share for every 500 watts MAX uses a 5 Farad cap Example: 1000 watts MAX – 1 Farad cap You also need what is called a "line level converter, if your unit has no value RCA or amplifier has high level inputs. Try http://www.soundomain.com/shop you can find some really good deals, and this site is the manufacturer certificate. Very important when shopping online! If you like I can send you some plans for reference. My plans are for a 4th order band pass box bass (bass-reflex AKA), which has two 12 years. Also included Java calculators you can use to determine parallel and series of values given the values of Ω, advice on the construction of the box and type, the calculation of port diameter and length (if used), the computation of box dimensions of the types of boxes (sealed, wedge, cylindrical, etc.), materials needed and even how to make a template for cutting perfect holes for their submarines. Just e-mail me My system sparky3489@yahoo.com Blaupunkt subs TSw1200 a Sony Xplod XM2200GTX. My amp is 1200 watts (200 watts RMS x 2), subs are 600 watts (200 watts RMS) each lid is 1.5 Farad SPL is of each sub about 112 dB Total cost (so far) = $ 410
How To Charge A Capacitor Car Audio Style – Power Acoustik PCX Cap – exocontralto
