Nylon Pulling
When you disconnect a dishwasher, so everything must be disconnected before proceeding?
A wire cable that connects the door spring is broken in our dishwasher KitchenAid. It seems as if I have to pull the machine completely before replacing the spring and nylon cords. Could someone please give me step- by step on how to do this? Thank you!
Unscrew the two screws anchor the countertop unit. Bring the leveling legs. The unit is on the rollers, pull under the counter. Be careful with the drain hose, power cord and water supply line. If the supply line water and copper is too short, you have to close the valve located under the sink and the dishwasher off before you remove from under the counter. Exit slightly and make sure the power cord is long enough, either wired or using the standard 110 plug. Slowly pull it, if desired, place a towel under the bedroom with the permissions to help prevent damage to floor. Complete the repairs needed.
The sexiest nylon foot!
